The Primo 5 EC tester provides a fast and dependable way to measure the low range conductivity (EC) of your water samples. It is ideally suited for the rigorous demands of water quality professionals. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. The temperature correction coefficient, also referred to as β, is fixed at 2%/°C for EC measurements.
With Primo 5, operation and routine maintenance has never been easier. Using a single button at the top of the meter, Primo is powered and ready to measure. Press and hold the button for a few seconds and Primo 5 automatically enters calibration mode. Simply open a sachet of calibration solution, dip the probe in, and within seconds the meter recognizes the buffer and stores the calibration.
EC Range 0 to 1999 μS/cm EC Resolution 1 μS/cm EC Accuracy ±2% F.S. EC Calibration automatic at 1413 μS/cm EC/TDS Temperature Compensation automatic from 0 to 60°C (32 to 140°F), β = 2%/°C
EC/TDS Probe direct, fixed Battery Type/Life 1.5V (2) / approximately 200 hours of continuous use; auto-off after 5 minutes of non-use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 180 x 50 x 25 mm (7.1 x 2.0 x 1.0”) Weight 50 g (1.8 oz) Ordering Information Primo 5 is supplied with batteries and instructions.
Customers also purchased: