$373.53
Prices include GST. Not all items are in stock. Call 03 9769 0666 to confirm.
The HI14143 is a glass body, single reference junction pH electrode made with low temperature glass and a quick connect DIN connector. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design.
This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe’s flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. The HI14143 is recommended for use with Hanna’s HI99171 pH meter.
Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.
The HI14143 uses low temperature (LT) glass, flat tip bulb, glass body, and open junction with viscolene gel electrolyte.
The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. This is beneficial since many food products are stored at low temperatures. As the temperature of the glass decreases in the sample, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures. If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter.The HI14143 is suitable to use with samples that measure from 0 to 50℃.
A flat tip is recommended to optimize surface contact for measurement of leather and paper.
The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature dependent. The faster the electrode reaches equilibrium, the steadier the reference potential.
Suspended solids and proteins found in food products will clog a conventional ceramic reference junction. This clogging will impede the measurement circuit between the indicating electrode and the internal reference resulting in slower response time, erratic readings, and frequent electrode replacement. The open junction design consists of a solid gel interface (viscolene) between the sample and internal Ag/AgCl reference. This interface not only prevents silver from entering the sample, but also makes it impermeable to clogging, resulting in a fast response and stable readings.
The HI14143 uses a quick connect DIN connector. This type of connector is made for Hanna meters that accept a quick connect DIN connector. The HI14143 is recommended for the HI99171 pH meter. Other type of connectors include BNC, screw type, T-type, and 3.5mm to name a few.
| SKU | HI14143 |
| Name | Flat Tip pH Electrode for Pulp and Paper with Quick Connect DIN Connector - HI14143 |
| Reference Cell Type | single, Ag/AgCl |
| Junction Type/Flow Rate | open |
| Type of Electrolyte | viscolene |
| Body Material | glass |
| Glass Type | low temperature (LT) |
| Tip / Shape | flat |
| Matching Pin | no |
| Max. Pressure | 0.1 bar |
| Optimum pH Range | pH: 0 to 12 |
| Temperature Operating Range | 0 to 50°C (32 to 122°F) |
| Body Length/Overall Length | 110 mm / 153.5 mm |
| Temperature Sensor | yes |
| Outer Diameter | 12 mm |
| Cable | 7-pole; 1 m (3.3 in.) |
| Connector Type | quick connect DIN connector |
| Amplifier | yes |
| Recommended Use | pulp, paper, and surface measurements |
All prices are inclusive of GST and not all items are stock items, if you require an immediate solution please send an email to sales@hannainst.com.au or call us on (03) 9769 0666.
Free standard delivery: We offer free delivery within Australia on orders over $150, typically arriving within 5 to 7 days. Delivery times may vary depending on the courier service and the recipient's location. Free shipping is not available with other offers or discounts.
Same-day despatch: Place your order before 1 PM Monday to Friday for same-day despatch (leaves our warehouse). Delivery times may vary depending on the courier service and the recipient's location. Subject to stock availability.
Please note that we do not offer shipping to PO Box addresses.
| Parameter | pH |
|---|
To empower customers to achieve quality by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
To empower customers to achieve quality by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea, to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
To empower customers to achieve quality by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea, to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
